Free Shipping

on orders over Rs 5000. This offer is valid on all our store items.
Cart (empty)
Your cart is empty
MENU

Advanced Search

  • Jumper Wire (Male) - Pack of 10
    Jumper Wire (Male) - Pack of 10
    Jumper Wire (Male connector on both ends) - Pack of 10 These are Jumper wire male to male, used in connecting female header pin of any developemnt board (like Arduino) to other development board or breadboard.Also you can combined it with our Female jumper wire to create Male to Female jumper wire. Jumper Wire (Male connector on both ends) - Pack of 10 These are Jumper wire mal...
  • Jumper Wire - Male-Female Connector on each end - Pack of 10
    Jumper Wire - Male-Female Connector on each end - Pack of 10
    Jumper Wire (Male Connector on one end-Female Connector on other end) - Pack of 10 15 cm length Ideal for Prototyping,AVR,8051,PIC Based Electronic Circuits To be used with Arduino,Raspberry Pi Length: 15cm (6") approx. Total Quantity :10 pcs (Mixed color) Click On Image to view in Large     Some of Application Images     Jumper Wire (Male Connector on one end-Female Connector on other end) - Pack of...
  • USB to Serial UART / TTL - 3.3V/5V Converter with USB Cable
    USB to Serial UART / TTL - 3.3V/5V Converter with USB Cable
          USB to Serial UART / TTL Converter with USB Cable , Support 3.3V / 5V Logic Lavel ,for Embedded Projects       The Converter is easiest way ever to connect to your Arduino/PIC/NXP/8051/AVR/microcontroller/Raspberry Pi/WiFi router serial console port. USB Connector Cable (Included) : Type B (Commonly used in Printer /Scanner ) PIN SPECIFICATION  Power  Ground  RX  TX  DTR  The power pin provides the 5V @ 500mA...       USB to Serial UART / TTL Converter with USB Cable , Suppo...
  • 20D9 NTC Thermistor
    20D9 NTC Thermistor
    20D9 NTC Thermistor Pre calibrated with resistive sense technology coupled with NTC thermistor, for the precise reading of the relative Humidity and surrounding temperature DHT 11 break-out board is a very popular, low cost sensor from Aosong, the breakout provides easy installation of the DHT11 sensor module. The board is also equipped with high- performance 8-Bit microcontroller which is connected to the DHT11 sensor module. Theoutput of the DHT11 is in the form of digital signal on a single... 20D9 NTC Thermistor Pre calibrated with resistive sense technology coupled with...
  • Arduino Uno R3 (Competible)
    Arduino Uno R3 (Competible)
    The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards in that it... The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). I...
  • Arduino Ethernet Shield (Wiznet W5100 Ethernet Shield)
    Arduino Ethernet Shield (Wiznet W5100 Ethernet Shield)
    Arduino Ethernet Shield (Wiznet W5100 Ethernet Shield) Arduino Ethernet Shield (Wiznet W5100 Ethernet Shield) ...
  • Arduino Mega 2560 With Usb Cable
    Arduino Mega 2560 With Usb Cable
    Arduino Mega 2560 With Usb Cable The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or... Arduino Mega 2560 With Usb Cable The Arduino Mega 2560 is a microcontroller b...
  • Atmega168 Microcontroller with Arduino Bootloader
    Atmega168 Microcontroller with Arduino Bootloader
    Atmega168 Microcontroller - with Arduino Serial Bootloader   TPS-01149/01229/00324             ATmega48/88/168   Features • High performance, low power Atmel® AVR® 8-bit microcontroller • Advanced RISC architecture – 131 powerful instructions – most single clock cycle execution – 32 × 8 general purpose working registers – Fully static operation – Up to 20 MIPS throughput... Atmega168 Microcontroller - with Arduino Serial Bootloader   TPS-01149/012...
  • ATmega328P Microcontroller with Arduino UNO Bootloader
    ATmega328P Microcontroller with Arduino UNO Bootloader
    ATmega328P Microcontroller with Arduino UNO Boot-loader              ATmega48/88/168/328     Features  High Performance, Low Power Atmel®AVR® 8-Bit Microcontroller Family  Advanced RISC Architecture  131 Powerful Instructions – Most Single Clock Cycle Execution  32 x 8 General Purpose Working Registers  Fully Static Operation  Up to 20 MIPS Throughput at 20MHz  On-chip 2-cycle... ATmega328P Microcontroller with Arduino UNO Boot-loader     ...
  • ATmega8L Microcontroller with Arduino Bootloader
    ATmega8L Microcontroller with Arduino Bootloader
    ATmega8L Microcontroller with Arduino Bootloader TPS-00330            ATmega8/A/L   Features • High-performance, Low-power Atmel®AVR® 8-bit Microcontroller • Advanced RISC Architecture – 130 Powerful Instructions – Most Single-clock Cycle Execution – 32 × 8 General Purpose Working Registers – Fully Static Operation – Up to 16MIPS Throughput at 16MHz – On-chip 2-cycle... ATmega8L Microcontroller with Arduino Bootloader TPS-00330   &nb...
  • ESP-01-ESP 8266 WIFI Module
    ESP-01-ESP 8266 WIFI Module
    ESP-01-ESP 8266 WIFI Module Description: Cloud inside It run LWIP 802.11 bgn WIFI Direct (P2P),SOFT-AP Built-in TCP/IP The AT command is perfect,efficient,concise Support three modes: AP, STA and AP+STA coexistence mode. Description: The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another... ESP-01-ESP 8266 WIFI Module Description: Cloud inside It run LWIP 802.11 bgn WI...
  • Humidity Sensor Module (BTH)
    Humidity Sensor Module (BTH)
    Description: Measure temperature and relative humidity using a simple interface that requires just three wires to the sensor: GND, power, and data. Supported by an Arduino library that makes it very easy to read values into your project, so with a single I/O line from your microcontroller you can read both temperature and humidity. Features: -40°C to +80°C temperature range with +/-0.5°C accuracy 0-100% relative humidity with 2-5% accuracy 0.5Hz sample rate (one sample every 2... Description: Measure temperature and relative humidity using a simple interfa...